Today I will introduce to you: the basic operation and precautions of vertical machining center 

 1 Check the oil quantity of the lubricating oil tank and the pressure of the barometer before starting the machine 

 2. After the boot, each axis returns to zero, pay attention to the position of each axis before returning to zero, and check whether the machine tool indicator is normal. 

 3. Check whether the lubrication system of the machine tool is normal, and the oil consumption of 1-2 liters every ten days is normal.

 4. Check whether the hydraulic meter, hydraulic motor and cooling fan of the machine tool work normally. 5. Hydraulic chuck is sensitive and reliable.

 6. Check the tool wear condition to avoid repair and waste products. 7. Run empty operation program (5-10 minutes in summer, 10-20 minutes in winter). 8. Check whether the parts processing program number and process are correct. 9. Do not touch the rotating spindle and tool. 10. The modified tool compensation should be confirmed before starting. 12. During the processing, the operator is strictly prohibited from leaving the post and doing things unrelated to the work. 13. Familiar with the application of machine tool operating panel and auxiliary functions. 14. Check and wipe each tool handle before processing. 15. After pressing the reset key, the knife must be re-invoked or the adjustment worker can confirm the correct processing. 16. Grease the knife once a day. 17 When using the M91 auxiliary function to cancel the alarm, there should be no tool on the spindle. 18. Check whether the Rainey whistle contact is clean. Daily production operation 1. When processing the first workpiece every day, the magnmagnation must be slowed down to see whether the tool track is correct. 2. When changing the blade, you must exit the tool compensation value. 3. The measurement tools used should be corrected before processing every day. 4. After the first sign is qualified, the operator shall not modify the procedure at will. 5. U-knife and Rainey whistle are forbidden to hang on the spindle when stopping 6. After the workpiece is processed, it is necessary to carefully measure whether the size is within the process range. 7. The machine tool in the process of failure must be emergency stop, repair. 8. Do not open the protective door during processing, and do not clean the iron cutting when the spindle is rotating. 9. Clean the floor and wipe the surface of the machine tool, and make a record of the shift. Three, the machine tool daily guarantee and a guarantee 1. Daily protection: the operator cleans the floor and wipes the machine surface after work. Refuel the daily refueling points. 2. A guarantee: the operator cleans the ground and wipes the surface of the machine tool, cleans the iron pin and dirt inside the machine tool, and makes the machine tool clean. Refueling at various gas stations and refueling points. Machine tools with cutting fluid change cutting fluid. The machine that needs to change the battery. Batteries. After cleaning, find relevant personnel to check, and sign an insurance policy after passing.